LBS-CR13 Floodlight – Professional Wide Area Lighting with 1000W and 2000W HIT-DE Lamps The LTS Lighting LBS-CR13 floodlight is a professional lighting fixture designed for use in large outdoor areas with high light requirements. Projects such as stadium lighting, sports field floodlights, airport apron lighting, port and shipyard lighting require powerful light sources. The LBS-CR13 is available with 1000W and 2000W HIT-DE lamp options for these applications. This product is a high-power floodlight using discharge lamps, not LEDs. Mechanical durability and environmental protection are crucial for long-term use in outdoor floodlights. The LBS-CR13 model's body is manufactured from corrosion-resistant high-pressure aluminum injection. Galvanized sheet metal pole mounting bracket, molded foam silicone gasket, and at least 4 mm tempered glass are among the mechanical components. The IP65 protection rating indicates resistance to dust and water spray. The IK09 housing and IK08 glass impact resistance define the impact resistance of different components. RAL9007 electrostatic paint supports the protection of the outer surface. The LBS-CR13 projector uses an asymmetrical reflector design. The high-purity anodized aluminum reflector helps direct the light to the target area. The specified ULOR value of 0% indicates that there is no direct upward light output in the defined optical arrangement. Optical performance is correlated with EN 13032-1 and EN 13032-2 test standards. In lighting design, the correct mounting angle, mast height, and photometric calculations should be considered together. The model, operating with 220–240V AC and 50–60Hz power supply, offers magnetic or stepped magnetic ballast options. The power factor is specified as at least 0.95. In addition to standard on/off control, automatic and two-level control options are available. Five, ten, and twenty-minute igniter options, a discharge resistor option, and a separate ballast kit design allow for electrical planning according to project requirements. The LBS-CR13 high-power outdoor floodlight can also be considered for industrial facilities, construction sites, security zones, bridges, racetracks, and large vehicle parking areas. LTS Lighting specifies production options in desired sizes, colors, and materials. The final selection should consider the area geometry, target illumination level, glare control, energy consumption, and maintenance access.
Products can be manufactured in desired sizes, colors, and materials.
Designed for use in sports facilities, parking areas, industrial areas, security zones, arenas, gyms, racetracks, shipyards, construction sites,
airport aprons, stadiums, racetracks, bridges and high-power outdoor floodlight applications.
Ürün Özellikleri / Product Specification |
|---|
|
Mekanik Özellikler / Mechanical Specif.. |
|---|
|
Güç seçenekleri / Power options |
|---|
1000W and 2000W HIT-DE lamp options are available. |
Işık Rengi / Light Color |
|---|
|
Optik Yapı / Optical Structure |
|---|
|






.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)