
VERFA S37
Interior Lighting
|
Downlight and Spotlight
|
Spotlight
Model Kodu / Code | Ürün Tipi / Product Type | Kurulum Tipi / Installation Type |
|---|---|---|
RS-S-037 | Spot | Flush |
Product Technical Specifications
Kurulum Tipi / Installation Type | Koruma Sınıfı / Protection Class |
|---|---|
Flush | IP20 / IP44 |
Işın Açısı / Beam Angle | Kesim Çapı / Cutting Diameter (mm) |
|---|---|
23° / 37° / 51° | Ø80 |
Dış Çap / Outer Diameter (mm) | Yükseklik / Height (mm) |
|---|---|
Ø87 | H100 |
Gövde Malzeme / Body Material | Gövde Kaplama / Body Finish |
|---|---|
Aluminum Injection Molded Body and Heat Sink | Electrostatic Powder Coating |
Difüzör / Diffuser | LED Marka / Brand | LED Sürücü / Driver |
|---|---|---|
Not required | Samsung / Epistar | Tridonic / Helvar |
Karartma / Dimming | Aksesuarlar / Accessories |
|---|---|
Phase Cutoff / 1-10V / DALI | Emergency Kit, Honeycomb, 3-Pin Connector |
Product Lighting Data
LED Tipi / Type | 3000K (lm) | 4000K (lm) |
|---|---|---|
Samsung COB LED | 710 | 770 |
Samsung COB LED | 1010 | 1070 |
Samsung COB LED | 1222 | 1261 |
Epistar Cob Led | 790 | 836 |
5000K (lm) | Akım (mA) | Güç (W) | CRI |
|---|---|---|---|
830 | 180 | 7 | >80 |
1130 | 250 | 10 | >80 |
1313 | 350 | 13 | >80 |
880 | 250 | 9 | >80 |
Product Dimensions
Model Kodu / Model Code | Kesim Çapı / Cutting Diameter (mm) |
|---|---|
RS-S-037 | 80 |
Dış Çap / Outer Diameter (mm) | Yükseklik / Height (mm) | Işın Açısı / Beam Angle |
|---|---|---|
87 | 100 | 23° / 37° / 51° |
Recessed spotlight with a smooth white round frame and 300° tilt adjustment. Three beam angles with Samsung and Epistar COB LEDs. Compatible with Tridonic and Helvar drivers. Tempered/frosted glass options. Suitable for residential and commercial interior lighting.
VERFA S37 is a recessed LED spotlight luminaire suitable for interior lighting projects. It offers various power and beam angle options for users seeking recessed ceiling spotlights, COB LED spotlights, and architectural spotlights. It can be used in applications where lighting points on the ceiling surface are planned with a regular arrangement. When selecting it to support general lighting or highlight specific surfaces, the intended use of the space and the required light distribution should be considered together. The VERFA S37 has a mounting cutout diameter of 80 mm, an outer diameter of 87 mm, and a body height of 100 mm. The aluminum injection body and heat sink structure are finished with electrostatic powder coating. Beam angle options of 23°, 37°, and 51° are available. Samsung COB LED alternatives are listed as 7W, 10W, and 13W. The luminous flux of these options at 4000K is 770, 1070, and 1261 lumens, respectively. The Epistar COB LED alternative has a luminous flux of 836 lumens at the same color temperature. Samsung options specify a CRI value >80. Product descriptions indicate compatibility with Tridonic and Helvar drivers, as well as tempered and frosted glass options. When planning recessed spotlighting, the light angle should be considered along with the distance of the luminaire from the target surface. Narrow-angle lighting can be considered to create a more focused distribution on a decorative object or a specific display area. Wider-angle options can help spread light over a larger surface. However, when determining the number of luminaires and their spacing, light angle alone is not sufficient; ceiling height, surface colors, and other surrounding lighting must also be taken into account. In residential settings, lighting needs around bookshelves, consoles, and seating areas may differ. In commercial interiors, the location of shelves, product dimensions, and visitor viewing directions influence placement decisions. Reflections on glossy surfaces and shadows cast by objects should be evaluated before installation. A balanced plan of general lighting and accent lighting supports the visual definition of different usage areas within the space. Before installation, the suitability of the 80 mm cutout for ceiling applications should be checked. In addition to the housing height, the space required for the driver, connections, and maintenance access must also be planned. The compatibility of the selected LED and driver components with the project requirements should be determined before implementation. Considering the housing dimensions, LED power, and beam angle together, the VERFA S37 can be used in a spotlighting arrangement suitable for the functional and decorative needs of the interior space.




.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)